$4 universal #FPGA #JTAG adapter.The pico-dirtyjtag project enables you to use the $4 Raspberry Pi Pico board as a JTAG adapter cable with openFPGALoader.

Loading FPGAs on a budget. The openFPGALoader project supports a wide variety of adapters. Let's review a few of the more cost-effective options for a stand alone programmer. #opensource #FPGA #openfpgaloader

ゆるい実験をしていますが、WSL2側で Makefile に WSLENV を書くだけで、Windows 側の gw_sh 用の tcl スクリプトに環境変数渡せるではないですか。素敵。.openFPGAloader でのダウンロード含めてだいぶ WSL での作業環境が出来てきました。

さて、時間あったので組み立てた。. どうしてもubuntuからopenFPGALoaderでFDTIデバイスが認識できないのでwin11で書き込んだ。

On one side libusb test demo worked for webusb. On the other openFPGAloader got WASM-ed to browser and showed the banner. Now it's the hard part of joining these together and you can guess what might be coming.

New "toy" recently arrived: @ArrowGlobal AXE5000 with @AlteraFPGA_ Agilex 5 — thanks @fpgahelper!.Now:.- Adding #openFPGALoader support.- Adding board to @enjoy_digital LiteX. First task:.Where’s the JTAG programming instructions/sequences for Agilex 5? 🤔

Tang Nano 9K、買ってあったやつ初めて取り出して、Lチカできたぞ! .I/F誌 2022-12月の2500円ボードで始める〜の、書き込みはopenFPGALoaderを使いなさいという方はusb認識できず、Gowin IDEのメニューにあるプログラマの方ですんなり書き込めた。

Hooray! I took the #tangnano20 k board donated by Sipeed in the city. 😀 #openFPGAloader is really not very friendly with this, but it will be solved one way or another

Another #openFPGALoader update:.- Added @latticesemi ECP3 (SRAM-only) support (thx M. Traxler/GSI & M. Boehmer/TUM for the board).- Added SSPI for @latticesemi ECP5 (thx @YSionneau for spotting it).- Added sponsor section — thanks everyone!

WSL2をupgradeすると、openFPGALoader がトラブる、汗）.WSL2側で.$ sudo update-alternatives --install /usr/local/bin/usbip usbip /usr/lib/linux-tools/5.4.0-170-generic/usbip 20.して解決、

Got this @SipeedIO Tang Nano 20k #FPGA board and got the #Verilog implementation of the W65C832 (32 bit 6502) I did earlier working with it. The dev kit used is still the open source tools: yosys, nextpnr-himbaechel, and openFPGAloader. The currently running program is written

@Merocle @NZheretic I got it working with openFPGAloader! Thanks, @GwenhaelG for the help.

ようやくLinuxでTang nano 9kに書き込めました。結局openFPGAloaderを使いました。

別のPCのWSL2でopenFPGALoaderトライ.右往左往して結局、sudo 入れて解決、.工数３人日、汗）

New @LimeMicro’s LiteX unified gateware for LimeSDR Mini V2 (Lattice FPGA) swaps Mico32 for RISC-V CPUs (VexRiscv, PicoRV32) & vendor tools for GHDL, Yosys, nextPnr and openFPGALoader for an ultimate #SDR #FOSS experience 😎. Mini V1 (Altera FPGA) & XTRX (Xilinx FPGA) also swap

Has anyone used the AMD-Xilinx ChipScoPY tools? It matches a lot of what I did for my PhD Python-TCl fault injection. I want to add support for fault injection. I can probably try to connect it to other backends like openocd or openFPGAloader.

Pacman for tang nano 20k. Outputs HDMI, connect PSX joystick to port 1: select for coin and start to play. Flash script from web:.curl -sL | openFPGALoader -b tangnano20k --file-type fs .

What is the best feature of openFPGALoader?.The fact that it lets you load an FPGA with almost anything. With all the options available, the hard part may be choosing which one to use from your existing collection. You can find the full list here:.

ProgramarもopenFPGALoaderもデバイスを認識しないんだが。。。まさかとは思うがTangNano付属のUSBケーブル、電源線だけとかの奴じゃないよね？？？

DirtyJtag is the first 3rd party firmware port to the Bus Pirate. It creates a JTAG cable compatible with UrJTAG, openFPGALoader, and other software. There is also the typical spare UART. Feedback is appreciated as I don't have many targets to test.