The light works. The gravity works. Anything else we have to take our chances with.

Pipe. A long-awaited construction project, especially since the rains have stopped and the basement can be ventilated.😜

What do you want to know?.

#Apicula acquired its first generator for the GW5 series - OSCA. In this case, its fixed frequency of 200 MHz is divided by 100 (set in the primitive parameter) and then clocks the DFF, resulting in 1 MHz. #gowin #sipeed #fpga

I'm using colored silk filament for this cover, simply because it shines beautifully🤣 .#3dprinting

significant errors! .* Based on the #gowin GW5A series #fpga chip. **

#riscv on #sipeed Tangprimer25k without * LUTRAM and BSRAM, but capable of running simple programs and featuring UART!. Thanks to Mecrisp's ** help, it has been shown that even the twisted clock system, modified ALUs, and specific additional DFFs are implemented in #apicula w/o

RT @BrunoLevy01: Mesh intersection algorithm ( just got faster !. Nice, but . does it really work ?.Let's….

PLL or OSC, whichever turns out to be easier. :). #fpga.

So, powerful testing devices such as attosoc or femto-riscv are out of reach for me until I make BSRAM, but testing BSRAM is easier with VGA, and that requires clock generators. So the next stage in researching the GW5A series (#gowin chips) is various ways to obtain a clock.

but I can show you a funny picture that uses the supported LUTRAM mode in the GW5A series :)

Well, it turned out quickly—you could call it my mistake, but from a programming point of view, there was no flaw, but the fact is that LUTRAM does not support all modes in this hardware. So I can't run a prime number search (attosoc), . #fpga

Added LUT RAM to #apicula for the GW5A series. Hmm. this doesn't seem to resemble prime numbers. Well, it didn't work right away, so there must be some subtleties involved — will investigate🤣 .#gowin #sipeed #fpga

Gee! . Apicula learned how to use these clever ALUs in the GW5A series!. It was fun solving this puzzle :) Now it's time to check if anything broke and send PRs ;). #fpga#gowin#sipeed#apicula

RT @nanochess: And now we have PRINT, a font, and a way to set the palette colors for NES/Famicom sprites. #retro #retrogaming #nes https:/….

RT @nanochess: A few weeks ago I needed to compile my transputer assembler using Turbo C. So I wondered, why I don't have my own copy of Tu….

I bought filament from this company for the first time and something interesting happened—it doesn't soften at 190°C, or even at 230°C!. I'm starting to think that this isn't PLA.🤣 .#3dprinting

Well, in principle, the counter can be decimal, but it is clearly not DIR and not the opposite of increment.😜 #ch32v003

Finished! The hinges and locks work, the booklet and diskette stay in place. 🤣 #3dprinting

RT @WillFlux: Isle 🏝️ is my new #FPGA project. Isle is a simple, modern computer — an open design that encourages tinkering, experimentati….

Yep. Sometimes you have to print things that cover the entire table and are actually on a mirror surface. And in white, too. Well, it's PLA, so no adhesive additives are needed, just carefully set the Z-offset.😜 #3dprinting