
Matt Mets
@cibomahto
Followers
2K
Following
4K
Media
839
Statuses
5K
RT @cnxsoft: .@Raspberry_Pi RP2350 A4 Stepping microcontroller addresses E9 GPIO erratum, security issues. The ne….
0
16
0
RT @therealdreg: With the milled pins of the BusPirate and the PCBite Ground Kit, you can use short DUPONT cables—male or female—as ground….
0
4
0
RT @TillitisAB: 🔉 Next generation of TKey has the code name Castor. We are now ready to do an Alpha release of Castor. It's for all you ea….
github.com
FPGA verilog and firmware for TKey, the flexible and open USB security key 🔑 - tillitis/tillitis-key1
0
2
0
Got all the parts to assemble a Leery LISN by @WestonBraun . The PCB assembly is complete, but I forgot to get spade connectors for the power bits. Next I need to scrape up some rf parts so that I can measure it with a 2-port VNA.
0
0
4
Got to x-ray image some circuit boards yesterday with the help of . It's amazing to be able to actually 'see' all the layers in your board. In order, the images are of our Iced Espresso, the @TillitisAB Tkey, and a @MilkV_Official Milk-V Duo.
0
6
14
RT @dangerousproto: This revision of the future Bus Pirate case fixes the size of depressions for silicone feet, and improves access to the….
0
1
0
RT @Blinkinlabs: Minimads are back in stock, and shipping immediately:
shop.blinkinlabs.com
Availability notice (2024-10-16): The MiniMads are in stock and can ship immediately!MiniMad is a all-in-one dedicated device for video mapping, based on the Raspberry Pi platform.It's ea...
0
2
0
Putting together a #p5js sketch to monitor the MQTT stream from the @seeedstudio SenseCAP Watcher. Tomorrow we'll train it to look for cats in the neighborhood garden.
1
1
3
RT @Blinkinlabs: Here's how we do fine-pitch solder paste printing for prototype electronics productions:
0
1
0
RT @Blinkinlabs: Back in stock: Bus Pirate 5 bundle and Bus Pirate 5 Probe Cable Set: Thanks @dangerousproto for th….
shop.blinkinlabs.com
This a bundle containing everything you need to get started with the Bus Pirate 5: The base unit itself, probe cable set, auxiliary cable set, and right-angle connector! Order everything ...
0
2
0
Got some Circuit-Painter designed demo PCBs ordered for @hopeconf ! I'll be doing some ad-hoc surface mount assembly tutorials throughout the weekend, come find me to give it a try.
0
0
1
RT @Blinkinlabs: Today we did a solder pasting speed run: Using our Solder Paster, we set up a stencil and applied paste to a board in exa….
0
2
0
RT @Blinkinlabs: Back in stock: Bus Pirate bundle and all cable accessories. Get yours while they're hot! https://t….
0
2
0
RT @cnxsoft: Inexpensive adapter adds #HDMI video and audio input to the #RaspberryPi through MIPI CSI-2 and I2S interfaces. #KVM. https://….
cnx-software.com
C790 is an HDMI to MIPI CSI-2 board compatible with Raspberry Pi single board computers featuring a 40-pin GPIO header that adds both HDMI input up to
0
19
0
RT @Blinkinlabs: Got some SPI flash chips that you want to probe? A Bus Pirate 5 + the Bus Pirate SPI Flash Adapter Bundle might be just wh….
shop.blinkinlabs.com
Bundle of three SPI flash adapters for the Bus Pirate. Buy them together and save!This bundle includes:1pc Bus Pirate 5 DIP8 SPI flash adapter1pc Bus Pirate 5 SOP8 SPI flash adapter1pc Bu...
0
1
0