olDirdey
@olDirdey
Followers
64
Following
835
Media
80
Statuses
270
A buddy came to visit. We added the final touch to his gold leaf decorated PS controller.
0
0
7
RT @MisirajEduart: Got some good supply of the high-quality, individually shielded cable. I'll be offering this starting from today for the….
0
3
0
Generate videos in just a few seconds. Try Grok Imagine, free for a limited time.
422
692
4K
2/2 . Better double check what you grab from the table and solder onto the board. In round one, I soldered this IC on. Damn it, same size 🤣
1
1
6
1/2 Yesterday, I fixed a failed mod and repaired 2 traces on the Super Nintendo CIC chip. it was already late.
1
1
19
Invisible Gamecube mod. No one needs gold plated screws to hold the shell parts together, but it's still awesome.
1
0
5
installed, it looks like this. Here is the reddit post from user supertazon for whom I goldplated the contacts
0
0
1
just a reminder. Check the caps in your consoles, waiting until you notice something is too late. This SNES was still working, but many traces were already corroded or about to be interrupted
1
0
7
the last step was to fix a factory error. The audio channels are reversed on this board. Fortunately, this can be solved relatively easily by moving two resistors. The result of all the work can be seen in the last picture
0
0
4
Bios installed and working. Next step was to remove 3 unnecessary traces that lead to jailbars
1
0
3
NeoGeo AES 3-6 has received a recapp followed by a socketed Unibios
1
0
4
I will change the size of the adhesive surfaces. the current version can be ordered at pcbway. gerber files will be available for download when I have changed the last things at
github.com
Flex Ribbon for easy Picoboot Installation on GC DOL-101 - olDirdey/Picoboot-Flex-DOL101
0
0
3
A friend has installed the first one. Test installation successful.
1
0
4
a new flex for the gamecube dol-101. compatible with picoboot version >0.4 (power supply via vsys-5v and not via the 3.3v output) there wasn't one for it yet, so I made a one.
4
11
112
Battery contacts for a Wavebird controller. Now they fit in with the rest. More on this soon
1
3
12
there seem to be people who can't face the truth. @collingall is one of them. it was pointed out that the BOM of the wavephoenix is very cheap and his $30 a bit much. so here again, if laserbear is too expensive for you, I will gladly build a receiver for the cost of the BOM.
0
0
0
I wanted to diagnose and possibly repair a megadrive 2 I bought as defective over the weekend. But after cleaning it, there was nothing more to do. Damnit 😆
1
0
4