LISUN GDJS series test chambers focus on testing needs of industries including LED lighting, electronic appliances and components.#LED #lighting

Electrostatic Discharge Generator making it widely applicable to EMC compliance testing needs in a wide range of fields, including LED lighting, consumer electronics, automotive electronics, industrial control and medical devices.#mobile #Automatic

LSG-6000 Moving Detector Goniophotometer (Mirror Type C)  manufactured by LISUN completely meets LM-79-24、LM-79-19, COMMISSION DELEGATED REGULATION (EU) 2019/2015, CIE-121, CIE S025, SASO 2902, IS16106 and EN13032-1 clause 6.1.1.3 type 4 requirements already delivery to Turkey

IK01-07 Spring Impact Hammer is used to simulate the mechanical impact that the tested product may encounter in normal use, so as to check the ability of the tested product enclosures to withstand mechanical impact. It is suitable for mechanical strength test of enclosures

The ESD61000-2 series ESD generator (also known as an ESD simulator, ESD immunity tester, ESD generator, or ESD static tester) is a high-precision instrument developed by LISUN specifically for ESD immunity testing of electrical and electronic equipment.

The EFT61000-4 series EFT Immunity Measurement (also known as EFT Burst testing, Fast Transient Pulse Generator, Fast Transient Burst Simulator) is a high-precision device designed specifically for electromagnetic compatibility (EMC) immunity testing.

https://t.co/oJ4aQF0QiO

The EFT61000-4 EFT immunity tester is especially designed according to the characteristics and requirements of EFT measurement and it is an ideal disturbance source of EMS measurement.

The SG61000-5 is an automatic surge generator (also called lightning surge immunity test, combination wave generator, surge current generator/surge voltage generator, combined surge voltage and current generator) .

LEDLM-84PL LED Lumen Maintenance and Aging Life Test System is designed according to IES LM-84 and TM-28. It is used to test & record the optical and electrical maintenance for LED luminaires. The software is based on Arrhenius model and TM-28 to calculate the LED life.

The SG61000-5 surge generator provides a common basis for evaluating the resistance of power cords and internal connectors of different equipment to high energy transient interference caused by natural lightning surge induction and large capacity load switching.

The equipment is mainly used for lighting fixtures, household appliances and motor tools safety test on the production line or in the R&D laboratory.

Temperature Humidity Chamber | Thermal Chamber | Climate Chamber simulate different climatic conditions, such as heat-endurance, cold endurance, dryness-endurance and humidity-endurance which defines the performance of material.

Salt Spray Test Chamber | Salt Fog Test | ASTM B117 Salt Spray ChamberSalt Spray Test Chamber is applicable to the salt spray corrosive test for the protection layer of components, parts, electronic and electrical parts and metal materials and industrial products.

Ring wave test generator is used for the simulative electrical network, the power supply of the reactive load and the control line switch sensing the ring wave of the low voltage cables terminal equipment caused by the disconnection of the power circuit, fault.

Electrostatic discharge simulator is highest electrostatic voltage can be up to 30 kv, which is enough to cover the most severe standard grade of electrostatic voltage requirement (the voltage requirements of the level 4 air discharge electrostatic is 15 KV).

LSG-6000 is the latest upgraded product of LSG-5000 and LSG-3000 in compliance with the requirements of the LM-79-19 standard Clause 7.3.1. It’s an automatic light distribution intensity 3D curve testing system for measuring light.

YWX/Q-010Salt Spray Test Chamber is applicable to the salt spray corrosive test for the protection layer of components, parts, electronic and electrical parts and metal materials and industrial products.

Electrodynamic Vibration Test System is used to simulate vibration states under various conditions by means of electromagnetic excitation to determine the vibration resistance, stability, and reliability of various components and finished products in service life.

LEDLM-80PL LED Lumen Maintenance and Aging Life Test System is designed according to IES-LM-80 and TM-21. It is used to test & record the optical and electrical maintenance for single LEDs or LED module. The software is based on Arrhenius model and TM-21 to calculate the LED life