jancikapral_
@jancikapral
Followers
833
Following
625
Media
91
Statuses
218
24 years old F1 enthusiast. Currently working on 2026 rules so I’ll keep you updated along my jurney of designing an F1 car
Slovak Republic
Joined February 2020
I did small breakdown of my MVRC car on my LinkedIn profile. Feel free to check it out! .
linkedin.com
2026 regs are pushing teams in the direction that should improve racing and allow cars to follow closely. That’s why FIA decided to go with the inwashing concept. I took a part in MVRC competition...
2
5
59
Sorry for lack of activity on this profile but my current situation doesn’t allow me to work on anything at the moment. Maybe I will do some small experiments but that’s it. I will be more active from September when I will get back to the 26 rules. Have a great summer everyone!.
0
1
22
Getting ready for the 2nd race of the MVRC 2025 Championship. We have found performance in crucial places and we hope to challenge front runners and fight for the podium in Monaco.
3
3
63
This is my first tutorial on designing in CATIA V5. In this video you will learn how to design easy and adjustable airfoil profile for F1 wings. Enjoy!.
2
4
50
Just a question for my followers. Would you be interested in the video where I would show you how I design things in CATIA? Let me know in the comments.
13
0
57
I can finally reveal our challenger for MVRC 2025. In collaboration with @Qvist_Designs we combined our ideas together and came up with this beauty. Development is going 24/7 right now and we are trying to extract every bit of performance. Updates on our progress will be posted.
6
15
140
RT @Qvist_Designs: In collaboration with @jancikapral will we participate in the #MantiumChallenge as a team by the name EJ Racing. We will….
0
7
0
Not F1 related but I thought it could be interesting to some of my followers. I didn’t have much time to work on 26 car in the last couple of weeks because of my school project in cooperation with ŠKODA. I designed wheel rim and a copy of ŠKODA Octavia. Enjoy pics and renders.
4
1
42
2026 renders soon😉. Thanks to @cesar_0702_ for his hard work and dedication on these renders.
2
9
117
These are cuts in Z=100. Comparing the flow around each concept sidepods
0
3
26
These are 21 like sidepods. Cuts are in Z plane directly under and above the flat part of the floor.
0
3
40
Since I didn't get the results I was hoping for from my latest CFDs, I decided to share my comparison of the different Sidepod philosophies. Specifically: Similar to the 2021, Zeropods and waterslides, these models are pretty undeveloped and are the same except for the sidepods.
2
8
119
The latest CFD results showed that my new floor was a step back. So I went back to the "tunnel" at the floor edge. I redesigned it and my big inspiration was the AM Valkyrie. I redesigned the floor foot and used the inside part as an outwash vane. More updates coming soon!
2
4
118
Now the development is about optimising everything rather than changing concept completely. Since my last CFD the biggest changes are floor edge and diffuser. Sidepods and EC were also changed slightly. Less deep waterslides to prevent separation and airbox is positioned higher.
6
16
258
I have a question for all of you. I added vortex generators to my floor edge, but Im not sure about its legality. Rules allow smaller radius than 25mm within 5mm of the floor boundary when viewed form above/below. Can sharp edges of this device be considered boundary? You decide!
2
2
53
New floor and leading edge, boat section and some adjustments here and there. I redesigned the floor edge to extract more air from the front section. The leading edge is now tilted more forward. The boat section has been changed according to the current trend-enhancing concavity
4
11
198