Greg's Maker Corner
@greghuber
Followers
2K
Following
24K
Media
3K
Statuses
19K
Personal account tweeting @: 3d printing, Agtech, drones/fpv, electronics, lasers, leather work, guitar. See my YT channel (also Greg's Maker Corner). Believer.
Nothwest Ohio
Joined January 2008
Woohoo! Thanks to Lucas Z. in the Prusa chat for helping me realize that I accidentally had the wrong profile here, which is why there was no hole for the self-tapping screw. Easy mistake to make, took a bit of work to swap it but I'm back in business now.
@3DInPhil this is a bit baffling. Any tips on the self-tapping screw? Surprised there is no hole for it.
1
1
4
Well, figured out what I did wrong. Got one of the profiles mixed up. Now I get to do some disassembly. :).
1
0
3
Prusa Core One update- made some good progress on the Buddy Board today.
3
1
15
I will include this tip, and more in my video series. I also removed the bad adhesive it came with, and used Isopropyl Alcohol to clean it off so the VHB tape will stick well.
0
1
4
Other than melted gummy bears, the only other issue I have ran into is the adhesive on the rubber feet. It doesn’t stick. I used vhb tape for a stronger bond.
3
2
6
Haribo time! The ones in my box were a little melted, but luckily I have some backups from my German friends.
1
1
6
Prusa Core One build is off to a good start! I was hoping to start a few days ago but lots of stuff going on this week.
4
1
12
Wow, the Prusa One Core box is huge. I am going to need to spread out a little to build it.
1
2
24
Blog Update for Greg's Maker Corner here. Check it out if you have a moment!
gregsmakercorner.com
It is about time for another project! As I post this, it is July 2025. It's hard to believe how fast the year is going. I have been on a bit of hiatus in terms of content, due to a lot of things...
1
2
6
Box for the Core is a bit heavy…. So no over the shoulder shot. Build series incoming! @josefprusa @dddpworld
3
3
22
Looking forward to my next project, a big thanks to @dddpworld !!.
I got a Core One from @printablescom generous reward system that I needs assembled. Meanwhile, @greghuber needed some content on his channel. So he’s assembling it for me in his remolded maker corner! Maybe @josefprusa will take note and consider sending him a unit for review.
0
0
3
Unfortunately, I ordered the wrong size iPhone 15 Pro case so now I am printing one in TPU. :).
1
0
4
And as I check Backmart for my old iPhone 13 pro, it looks like I can get $300 back so I'll start that process soon now that I have my authenticators moved over. So that makes this upgrade quite cheap, and no lock-in to ATT for 3 years. Definitely a good way to go in my book.
0
0
1
Not bad. The Amazon Refurb phone has no cosmetic issues that I can see, and the battery health is quite good!
1
0
4
The charging port on my 13 Pro can be a little finnicky. I've had it for about 3.5 years now, so time to either replace the battery or go with a newer model. I decided to go with a 15 pro for the new one from Amazon.
1
0
2
I decided to go with an Amazon "Refurbished Premium" iPhone to replace my 13 pro. Should arrive on Tuesday. Has anyone tried one yet? Good reviews. Also, I am planning on selling my 13 pro (81% battery, but good condition overall) to Backmarket.
6
1
5
Maker Corner update- most of the repair work (to house) is done. I need to do some touch up to paint and I’ll be putting things back together again so I can get my printers and workbench back up and running.
2
1
9
To all my 3d printing peeps- due to personal obligations this year, I won't be able to make MRRF. :( I will miss everyone. On the plus side, I should have the Maker Space back up and running by end of the month.
4
1
18