AUTOMATIC Disposable surgical mask with earloop 3ply making machine 来自 @YouTube.

The three-in-one feeder frame main shaft adopts oil pressure expansion system, which has large tension and good safety. Equipped with hydraulic action force press arm and equipped with one-way clutch device, the pressing material is not bulk material.

The three-in-one feeder frame main shaft adopts oil pressure expansion system, which has large tension and good safety. Equipped with hydraulic action force press arm and equipped with one-way clutch device, the pressing material is not bulk material.

MAC series feeder can improve your production capacity and maintain your market competitiveness. The high-efficiency computer servo motor is used to control the feeding length for accurate feeding and the setting is simple. #StraightenerMachine

The feeding width is adjusted by the two-roller roller with the screw. When the material is discharged, the outer roller of the cylinder lifts the material to avoid the material, and the material is loaded and unloaded. #CNCfeedingmachine #RuihuiFeeder

The maximum servo material thickness can reach 8mm, and it can be applied to the processing and production of various high-strength plates. The processing of sheet materials can also be automated. #straightenerfeeder #servorollerfeeder #partsfeeder

Ruihui feeder adopts computer NC control system, which is more user-friendly. It is suitable for feeding and correcting all kinds of metal sheets. It is suitable for a wide range of materials from 0.3-6.0 thick, designed for space saving and easy operation

three-in-one feeder simple structure design, maintenance, management are simple, and enhance the safety of the operator's work; roller chrome, high precision, very durable. #sheetflatteningmachine #ruihuimachinery #autometalsheetfeeder #levelermachine

Three one-machine feeding synchronization is high, the leveling feeding accuracy is very good. However, the traditional split-type machine has poor synchronism, and the actual leveling feed accuracy is difficult to guarantee. #steelstraighteningmachine

Ruihui nc feeder shortens the feeding and debugging process, reduces labor productivity and production time, reduces production costs and improves efficiency. Nc feeder simplifies the above process and avoids the complicated work of the feeding process.

The decoiler is equipped with a variable speed drive as well as with a very sensitive loop control. By this way it is assured that there always will be enough material available for supply of the feeder-straightener. #automationequipment #2tondecoiler

three-in-one feeder meets the production needs of different types of punching machines. The yaw feeder in the punching machine is the most common used in automobile manufacturers. Everyone knows the car. Auto parts parts have high precision requirements.

Put down the material press wheel to press the material, start the material rack manual discharge function, let it press the material part of the material roll, then cut the material of the material roll, and raise the material of the material rack.

Three-in-one feeder is suitable for continuous stamping processing of various hardware, electronics, electrical appliances, * and automotive parts, feeding correction, accurate and durable; material roll device, using oil pressure expansion. #coilleveler

The ultra-thick plate NC feeder is easy to operate and improves production efficiency. The traditional method of material feeding, feeding and debugging is very cumbersome, which wastes a lot of manpower, material resources and effective working time.

The three-in-one feeder is production facilitates the majority of machinery factories. Because of its simple operation and stable performance, it is widely praised by stamping customers, just as compared with other automation equipment. #punchingmachine

From the precision point of view, three-in-one is better than two-in-one, because the three-in-one feeder is directly into the mold after leveling, and the two-in-one is first corrected and then fed. After the material arc, the leveling will still be there

The roller feeder high-precision unidirectional device, reverse device and high-grade are used to ensure the brakes of the film are fundamentally ensured. Feeding accuracy is accurate to ±0.02mm. #automaticmachine #decoiler #servofeeder

Two feeders and molding machines are connected. The NC feeder's operation panel can be individually started and stopped, and the respective punches are controlled to stop. In addition, on the online control panel, each machine can be started separately.

The NC servo feeder is driven by a servo motor - with a punch cam signal, and the servo motor provides a feeding action synchronized with the punch. Because it has the advantages of simple operation, easy adjustment of the delivery distance. #decoiler