This article evaluates the ability of simpleRTK2B Budget to detect horizontal displacements. ✔ Minimum detectable displacements were:.22.8 mm (3 h),.11.7 mm (6 h),.8.7 mm (8 h),.4.8 mm (12 h).✔ Accuracy improves significantly after 8 h of data. More:

Explore the range of Base and Rover kits:

Today we share the article which evaluates the performance of Galileo HAS for real-time Precise Point Positioning (PPP) using low-cost GNSS receivers in static, pseudo-kinematic, and UAV tests. K.Learn more

Don’t like mowing the lawn? Let a robot do it for you!.Today we’re featuring OpenMower – an open-source robotic lawn mower. Thanks to ArduSimple receiver, it follows precise paths mowing faster and smarter.

Do you have a word to share about ArduSimple? Leave us a review on Google:

Looking for high precision on a budget? These RTK kits are your best entry point. Just make sure there’s an NTRIP correction service and internet coverage in your area. Start mapping like a pro with one of these ready-to-use kits.

Join a customer’s journey from Amman, Jordan (~1000 m above sea level) to the Dead Sea (~400 m below sea level) — the lowest point on Earth — using the Septentrio mosaicHAT board by ArduSimple. 🎥:

Need portable power for your Arduino or RTK receiver? The LiPo Battery Shield is a 3500 mAh rechargeable pack that makes your project fully autonomous. Perfect for datalogging, permanent RTK bases, or backup during outages.

To help you choose the right antenna, we’ve prepared a detailed comparison table with performance metrics! Find the perfect antenna for your project now:

Curious about low-cost solutions for mapping with spherical cameras?.Check out this research exploring how action cameras combined with affordable ArduSimple RTK board can deliver georeferenced images with mapping-grade accuracy. Read:

Looking for a full band full constellation RTK antenna for your GNSS project? We have a few, but today we announce the smallest and lightest of them all:.- L1, L2, L5, L6 (L-Band) support.- GPS, GLONASS, BeiDou, Galileo and SBAS.- Only 74 grams.

As simple as that. Do you have any XBee compatible plugin board and want to connect it to your Pixhawk autopilot via JST connector serial port? Now you can do it with the JST Carrier Board for XBee Plugins from ArduSimple.

Detect downy mildew disease in kimchi cabbage with RTK! Yes, it’s not a joke. A drone mapped the field using GCPs measured with an RTK kit, and a precise map was used to analyze hyperspectral data from infected areas to identify disease stages.

Need to connect one GNSS antenna to multiple receivers? Our new 1-to-4 GPS/GNSS Antenna Signal Splitter lets you connect up to 4 receivers to a single antenna – no external power needed!.

Need centimeter-accurate GNSS in a tiny M.2 form factor? Check out the simpleRTK2B M.2 — a compact, high-performance dual-band RTK receiver powered by the @ublox ZED-F9P!.🎥 Watch: 📚 User guide: h https://www.ardusimple.com/user-guide-simplertk2b-m-2/.

Researchers have validated the use of simpleRTK2B board (@u-blox F9P) to measure real-world walking speed. The system showed strong agreement with traditional stopwatch+odometer measurements, even under arcades and dense trees.

Want to give your robot centimeter-level GPS accuracy? Check out the simpleRTK2B Starter Kit (Medium Range) — the fastest plug-and-play solution for precise navigation over distances up to 1 km!.

A new paper explores an navigation system for autonomous surface vehicles. It includes real-world tests on a river using simpleRTK2B Heading – Basic Starter Kit for heading estimation. 📄 Full text: 🔗 @ublox

RTK Base Station (CORS) for just 797€– Simple to Set Up.• Triple-band, full-constellation, low cost.• Compatible with existing CORS networks.• Everything’s pre-assembled, just connect to the internet and go!.Order now