ZombieHedgehog | Hedgehog Makes
@ZombieHedgehog_
Followers
2,206
Following
817
Media
904
Statuses
6,968
I am a 3D printing enthusiast who loves building and upgrading 3D printers, as well as providing community assistance and teaching! @Hedgehogmakes on YouTube
Maine, USA
Joined September 2015
Don't wanna be here?
Send us removal request.
Explore trending content on Musk Viewer
Kendrick
• 873712 Tweets
#REJECTFINANCEBILL2024
• 854630 Tweets
Drake
• 424391 Tweets
Not Like Us
• 297977 Tweets
都知事選
• 211531 Tweets
Corinthians
• 89645 Tweets
#RevolutionKe
• 73150 Tweets
#Resign_Stalin
• 68066 Tweets
Eldoret
• 66406 Tweets
ひまそらあかね
• 51602 Tweets
Westbrook
• 43986 Tweets
REGZA
• 36043 Tweets
梅雨明け
• 27210 Tweets
神奈川県警
• 20883 Tweets
Kdot
• 15245 Tweets
水卜アナ
• 11775 Tweets
नीतीश सरकार
• 11769 Tweets
暇空さん
• 11350 Tweets
Last Seen Profiles
Pinned Tweet
Three easy steps for getting extremely high quality prints:
1. Purchase
@Polymaker_3D
filament, I recommend starting with a Polylite PLA or PLA Pro. Bonus points if you use my affiliate link:
2. Use a
@BambulabGlobal
printer, I've had great success with…
7
1
17
The
#stealthchanger
is working great with 3 tools!
@fixumdude
's FDM looks great in 3 colors, and prints without a ton of Bambu waste!
More tools and content coming after
@rmrrf
!
20
20
240
Too cool not to share...
I ended up getting the Tapchanger/Stealthchanger dock aligned correctly and I'm able to perform repeatable tool docking.
This video is an example of how a toolchange would work, using conservative speeds. I'm very hyped to get the rest of the parts for…
15
21
237
Printed in the brand new
@Polymaker_3D
Galaxy Dark Green! I'm seriously going to need more colors in this series...
What colors would you like to see? This isn't your standard glitter, the effect is incredible in person.
Pick some up at my affiliate link while there is stock:…
Beautiful top layers on the
@BambulabGlobal
P1S!
Can you identify the new
@Polymaker_3D
filament used here?
4
2
32
17
12
225
Calibrated? Seems so!
I had to copy
@elianarose66
and design a print to hold the
@emberprototypes
CXC. Much eaiser than randomly placing the camera on the bed!
4
5
31
12
20
201
When
@Polymaker_3D
began their Discord, I volunteered to help and grow their community, which is now over 5000 users and an official Discord Community Server.
Since then, I've attended events, participated in filament development, and shared my knowledge/excitement for…
29
18
162
I definitely need this
16
18
152
It was awesome to see the 3d printed
@Lamborghini
at
@rmrrf
! Hope to see more big projects like this next year.
9
14
145
The micronchanger is up and running at
@rmrrf
! Stop by my booth to check it out AND enter to win a
@ff3dprinters
5M printer or a
@emberprototypes
CXC/special Bambu build plate!
8
13
136
Polysmooth.
Have you ever wanted to create a shiny 3d print without visible layers?
@Polymaker_3D
has a magical Polysmooth filament that with just a few sprays of isopropyl alcohol (ipa), it turns the surface finish from matte to shiny.
It prints similar to PLA, benefits from…
11
9
130
Yes, this is the same system as the giant toolchanger! Just 180mm vs 350mm beds.
Not much to see here, just a stealthchanger toolhead on a
@West3DPrinting
Micron+ 👀
Next step is to design a dock, swap to a
@BigTreeTech
EBB36, and add 2/3 more tools!
What would you print on a tiny toolchanger?
5
5
41
10
12
129
Toolchanging! After a quick calibration print (pending delivery of an
@emberprototypes
CXC), it's up and running! Still need to tweak slicer/firmware settings but it's great to have a working toolchanger.
Another round of shoutouts, thanks to
@LDOMOTORSJASON
for helping with the…
13
12
123
Proof that my toolchanger was working before traveling to
@rmrrf
!
See you all there!
Also,
12
6
121
After a flawless 150 swap cube, I've increased the Z speed to 150mm/s (stock LDO 2.4 motors). Looks like the approximate tool change is about 10 seconds now.
Too cool not to share...
I ended up getting the Tapchanger/Stealthchanger dock aligned correctly and I'm able to perform repeatable tool docking.
This video is an example of how a toolchange would work, using conservative speeds. I'm very hyped to get the rest of the parts for…
15
21
237
19
12
120
I'm very happy how this table ended up! Tomorrow I'll be recording some content around the
@rmrrf
event, what are you most excited to see? (Besides the stealthchangers ;)
Thanks to
@Polymaker_3D
for getting me out here!
9
9
118
The amazing Black Forest cake as promised! Sooo looking forward to this :)
15
5
118
The view from behind looks pretty cool too! Gotta love those backers from
@West3DPrinting
Wiring is at the "functional" stage 🤣
This little printer has some big features 👀
Micronchanger is getting close to ready to be almost done to bring to
@rmrrf
!
Needs a little more
@emberprototypes
CXC love next 😍
Can't miss what
@Polymaker_3D
colors are loaded either!
6
8
80
7
9
110
With the Wekster mega out of the way, it's time to print some more
@dddpworld
swords for
@rmrrf
!
So far since recalibrating the tool docks, I've had no docking issues. Still using cheap hotends so the temperature struggles to stabilize.
What hotend that you know is the quickest…
11
10
103
Debate: should this waste be considered "part of the print"? I'm well aware the purge is essentially trash, but the resulting print was only possible because of it.
No one seems to want the waste, but everyone wants a beautiful multi color print.
Final weigh-in: 1007 g filament poop, 202 g purge tower and 489 g of print. That makes 1209 g of waste VS 489 g print, or a ratio 2.5/1 which is quite wasteful!
116
40
631
52
5
100
Meet Screwfinity Unit!
An innovative, 3D printable organizer for all your fasteners and more. It's stackable and integrates seamlessly with Gridfinity.
Discover how it will revolutionize your space:
#3Dprinting
#OrganizeWithEase
@Thangs3D
5
14
99
Nearing completion! Enclosed and printing
@Polymaker_3D
ABS/ASA very well. Waiting on some compression feet, re-crimping the toolhead motor, installing the bottom panel, back panel, LED config, handles, and overall backpack cable management.
I'm very impressed with this little…
11
9
99
Took some troubleshooting but here's my first ever 4 color print from a toolchanger! Still more firmware/slicer/hardware tweaking to do, but it's getting close!
Huge thanks to
@pixstitch
and
@ChrisPirillo
for the raids today, and everyone cheering this awesome project on.
5
14
99
Thanks to over 3500 people for coming to the first
#rmrrf
, this was my first festival since starting 3D printing and it was truly amazing. Very well organized event, everyone was very positive and encouraging. I hope to make it next year :)
8
5
92
The Doron Velta is a hit at
@MakerFaireLI
! Probably one of the coolest printers to watch, and the handy enclosure keeps small hands out 😂
6
10
87
The printed part designs by
@Prusa3D
are fairly impressive. No supports, designed for easy printability, and they look great too.
Printed beautifully in
@West3DPrinting
Ambrosia Galactic ASA on the
@BambulabGlobal
X1C
4
4
86
OMG... I was not expecting this at
#MRRF
, but this is the new
@LDOMOTORSJASON
Smart Orbiter V3! Not just an extruder, it's packing a whole hotend+fan!
13
8
84
I changed one setting in Orca slicer, can you guess what was causing these terrible overhangs?
12
5
85
I'm a little disappointed in the amount of supports required, but the toolchanger seems to be handling it well! Excited for my new city print!
My newest
#3dprinted
design is now available to download for free on
@printablescom
and
@Thangs3D
! Links in the reply.
For a successful print, make sure to closely follow the included instructions.
4
5
32
8
7
84
And the Doron Velta is printing! Still more to do, but wanted to run a few test prints first.
10
2
84
What accent color would you use with Midnight Meteorite?
I had a dream that one day, the perfect shade of purple filament would exist.
Today, it lives thanks to
@West3DPrinting
!
Introducing Galactic Midnight Meteorite, the latest sparkle ASA from West3D. Forged from deep in the DMs of Discord, I knew this was going to incredible.…
15
11
76
28
2
84
Printing a bigger version on the
#toolchanger
!
More progress on this build next week, I'll be working on wiring and building toolheads.
I found the perfect colors for the McGybeer Arti-Gosaurus! Print this in
@Polymaker_3D
Starlight Comet and PLA Pro Metallic Gold for the best effect!
Find this model and more over on
@Thangs3D
at my affiliate link:
2
3
20
8
4
79
The quest to find where the extrusion issues are in the
@Creality3dP
K1C leads back to... the extruder.
This is probably the worst design I've seen for an extruder, when filament is inserted, it causes the nylon gears to mesh at an angle and bind. Filament movement with just the…
19
6
81
This little printer has some big features 👀
Micronchanger is getting close to ready to be almost done to bring to
@rmrrf
!
Needs a little more
@emberprototypes
CXC love next 😍
Can't miss what
@Polymaker_3D
colors are loaded either!
6
8
80
Working on my new
#makerchip
design with
@K2_Kevin
, I think this is a winner for sure!
Printed in
@Polymaker_3D
PLA for MRRF
14
7
80
And with this, my set of planned
@Polymaker_3D
prints for my
@rmrrf
table is complete! Everything printed beautiful out of various Polymaker filaments!
And BTW, polyterra seems to work well for the outer holder. Usually I don't use it for functional prints but I purposely made…
4
3
76
I had a dream that one day, the perfect shade of purple filament would exist.
Today, it lives thanks to
@West3DPrinting
!
Introducing Galactic Midnight Meteorite, the latest sparkle ASA from West3D. Forged from deep in the DMs of Discord, I knew this was going to incredible.…
15
11
76
Good news everyone! The initial testing of the Micron+ toolchanger docks looks promising. With enough space for 2 more docks in the middle AND using the original front idlers, there's enough clearance for the gantry to reach max Z.
I've also modified the docks to increase the…
3
8
74
Gotta say, the prusa interface is top notch! Great time to invest in the prusa ecosystem.
Firmware 6.0.0-RC1 for Original Prusa MK4 & MK3.9 is out!⚡️
- MMU3 support for the MK4/MK3.9
- Touch support
- Stuck filament detection using the Load cell sensor
- Cold Pull
- Stealth mode
- Improvements by Prusa community
14
24
238
10
9
76
Hey, the
@Prusa3D
MK4 might not be the fastest printer out there. But it seems to be reliable so far (when built properly).
It definitely has the best semi automatic filament loading/unloading and has inpsired me to upgrade my other printers to have a similar QOL.
Thanks for…
9
4
75
Wiring on a printer can be a nightmare.
@LDOMOTORSJASON
kits are some of the most inclusive, easiest, and well documented in terms of wiring.
Electronics bay for the Voron toolchanger (Tapchanger/StealthChanger), in progress. Might change some stuff around for the 6 CAN toolhead…
5
4
73
Introducing DV.005! Great cereal for an amazing little printer ;)
6
6
73
Both prints are done using
@prusament
Galaxy Silver.
One is done on my newly build
@Prusa3D
MK4.
The other is on a
@ff3dprinters
5M Pro.
Can you figure out which is which?
27
7
70
I love how the booth turned out for
@MakerFaireLI
! So far kids are loving all the prints (adults too). Thanks to
@Polymaker_3D
for sponsoring my table and the filament to print everything! Lots of durability testing today 😅
7
10
70
Test print off of the Micronchanger, needs a little bit of tuning but is looking good!
@Polymaker_3D
always looks beautiful 😍
4
8
68
After a flawless 150 swap cube, I've increased the Z speed to 150mm/s (stock LDO 2.4 motors). Looks like the approximate tool change is about 10 seconds now.
Too cool not to share...
I ended up getting the Tapchanger/Stealthchanger dock aligned correctly and I'm able to perform repeatable tool docking.
This video is an example of how a toolchange would work, using conservative speeds. I'm very hyped to get the rest of the parts for…
15
21
237
6
6
68
Some VERY interesting answers from
@BambulabGlobal
from their AMA today...
Bambu toolchanger?!?
Bambu XL CoreXY*! (Bedslinger too slow to scale up)
Starting to get excited!
11
3
68
Some progress pictures of the Micron+changer (Micronchanger+?)
Hoping to have the second tool working today!
4
6
65
I'm happy with the Doron Velta color scheme! Increased Z by 50mm, using
@West3DPrinting
Midnight Meteorite ASA and
@Polymaker_3D
Galaxy Blue ASA.
3
5
62
Moved some printers around...
Still some work to do as always, but I'm able to print on all 10 at the same time!
What printer projects do you want to see from me in 2024?
10
4
61
Progress!
Doron Velta Build: Day 2 | Screwed Up Clip | 3D Printing Tips & Tricks
0
1
3
5
5
62
Hey, there we go! I'm assuming this new cable design is much more durable than before.
Who is waiting on a replacement bed, or is considering buying an A1 for the first time?
The Bambu Lab A1 is making its comeback!
The first batch of replacement heatbed units is arriving at local warehouses, and will be off to customers' doorstep soon! The revised heatbed unit features several updates to ensure durability. Learn more about these updates in the…
44
65
630
22
2
62
More progress on the Doron Velta, got the movey bits in place. So strange feeling how delta kinematics work in person!
PEX Peppers BeeBomb for scale
3
7
61
Starting my first big print on the Doron Velta! I'm amazed how well the
@captubes
XS bowden tube works at that length.
And the Doron Velta is printing! Still more to do, but wanted to run a few test prints first.
10
2
84
10
4
61
Best thing to do when testing a new 3D printer is to print a large stress test overnight?
Well it looks like the
@Sovol3d
SV08 was able to handle it well! This is with the stock Orca profile provided with it. More tuning to come.
Printing a Support Free Milk Crate by LayerOne3D…
5
7
60
Not a cooling or flow issue! It's the wall loop direction, it was set to "Auto", I manually selected "Clockwise" and the issue went away. Something interesting for
@fever_soft
to look into potentially.
11
7
61
Introducing the
@Polymaker_3D
PolyDryer! This unique storage + drying system will revolutionize how you 3D Print (affiliate):
- Hot swappable dry boxes
- Slim profile heater base
- Hybrid drying system with both heat AND desiccant to ensure long term…
8
9
60
Should you put an
@E3DOnline
revo on your voron? Yes, yes you should.
Plenty of performance for reasonable print speeds and very high quality. The
@LDOMOTORSJASON
Orbiter V2 does play a large factor though.
Look at that
@Polymaker_3D
Starlight PLA! Can you guess the color?
7
8
59
SV06/SV06 Plus owners, huge announcement!
I just launched my Sovol Saver, the Sovol SV06/SV06 Plus Z Sync Mod, available on
@Thangs3D
!
With only one printed part and a few pieces of hardware, you can eliminate the need to ever tram your X axis! This was a huge improvement over…
3
13
58
And now for something completely different
6
3
57
I 3D printed the Hex Ukulele from
@printablescom
! Very fun project with 100% printed parts (minus strings).
@Polymaker_3D
Starlight + Galaxy PLA was used with PETG for the screws.
Yes, it does work, however I have not learned how to play.
Printed live on
@MakerDeck
#hotmakes
5
6
55
Safety PSA for the
@BambulabGlobal
A1 cable situation. If you printed the strain relief fix, there's a high change that it's going to cause more damage than not installing. Remember that PLA is quite flammable too.
Images from the A1 owners Facebook group.
Bambu's official…
11
12
56
I am VERY impressed with this 350mm
@LDOMOTORSJASON
2.4, modded with a Dragon Burner toolhead instead of SB (
@E3DOnline
revo 0.4HF, Orbiter V2).
Do you want another video in the Tapchanger series about my thoughts on these mods before I convert it over?
Prints
@Polymaker_3D
PLA…
8
5
56
Very impressed with the
@Sovol3d
SV06 when it comes to speed. Running at 10k accel, 20 SQV with klipper and input shaper. Higher flow as well so it's able to actually print at these speeds. More tuning to come! (and better fans)
8
8
55
Something is clearly wrong with my
@Prusa3D
MK4 build. I can't imagine this flagship printer would print this poor. Printed with the stock prusa profile, tested with both IS and NON-IS profiles.
Any suggestions are appreciated!
I printed my own ASA parts (scaled correctly,…
Both prints are done using
@prusament
Galaxy Silver.
One is done on my newly build
@Prusa3D
MK4.
The other is on a
@ff3dprinters
5M Pro.
Can you figure out which is which?
27
7
70
20
8
55
Sneak peek into the Micron+ toolchanger (Micronchanger?)
I modified the Tapchanger dragonburner docks to work with 1515 extrusions and installed the stealthchanger shuttle.
Hypothetically I might be able to shrink the docks very slightly and swap the front idlers to BFI to…
6
6
55
First time I've had a non recoverable clog in a
@BambulabGlobal
hotend!Pretty new as well :(
18
2
54
Has anyone tried this?
HULA Anti-Vibration Foot is now available for download on MakerWorld. It decouples the printer from the table and dampens the horizontal XY forces generated by the toolhead/bed, preventing the printer from wobbling.
17
63
443
10
4
55
I'm organizing a little giveaway stream on my birthday weekend! Stay tuned for specific times (should be around 9pm EST).
If you are a vendor and would like to contribute something, please reach out! I'm working to secure a few fun things, lets make this an exciting event!
6
13
54
A printer that just works, even after 2000 hours. That's what I expect now out of new printers in 2024, and why I love using the
@BambulabGlobal
X1C.
This
@sunluofficial
Rainbow 02 PLA has a very slow transition, great for large models!
Check out the
@IK3Digital
wall mounted…
6
2
53
Worth checking out?
Shoutout to
@Polymaker_3D
and
@West3DPrinting
for providing the 6KG of PLA for my 6 tool Stealthchanger to be printing toys at
#RMRRF
! PM Starlight and the new Ambrosia Dolos Color Shifting PLA filaments are awesome colors. Stop by my maker table to see their beauty in person.
6
4
35
3
1
53
Great view to end a wonderful weekend! Thanks to everyone who stopped by my
@rmrrf
booth to chat and check out the
#stealthchanger
project!
#wallpaper
3
3
53
Short path bowden is epic!
4
3
53
Do you want this solution or a Sovol toolchanger?
32
6
53
That's right,
@E3DOnline
Revo on a
@BambulabGlobal
X1C using the new
@BIQU_3Dprinter
Panda Revo hotend. This is technically not a supported setup out of the box but I essentially swapped the Revo connectors for the X1 style connector.
Pictured is a 0.6mm Revo HF with 60w heater
12
8
52
WOW!
Check out this brand new
@Polymaker_3D
Galaxy BLACK ABS, finally available at (aff link)
This is going to be my go-to standard for all black printer parts, it looks exactly like the Galaxy Black PLA that I normally use.
4
4
51
Wow... that's something.
Hope the XL isn't using PETG parts 😅
Original Prusa XL Enclosure is here! ✨ Start printing on your Original Prusa XL with advanced materials like PCCF, Nylon, PP, and ASA in a stable printing environment. 🦾 Read more about it in our new article. ⤵️
58
35
315
6
5
53
Who said toolchangers needed to be slow? Testing out the new
@BondtechAB
LGX Lite PRO (what a name 🤣) with a
@phaetus3D
Rapido 2 to validate this toolhead setup before building 3 more.
Stop by my booth at RMRRF to see if everything made it in one piece!
2
7
52
I never thought I would be on top of the
@Thangs3DContest
, but here we are!
Thanks to everyone who liked and downloaded my
#Screwfinity
unit, based on the
@K2_Kevin
ScrewU-nit, based on the
@ModBotArmy
Voron 0.1 Hardware Organizer.
I'm working on new divider bins, different…
3
8
52
Thanks for everyone's help today! The pink and purple
@Prusa3D
is rocking and rolling with some
@Polymaker_3D
Starlight PLA.
Ready for the MMU3 once it's released!
5
3
52
Come stop by the
@Polymaker_3D
booth at
#rmrrf
tomorrow and see the
#rookprinter
2020 in action! With all
@LDOMOTORSJASON
motors and an
@E3DOnline
Revo, it's quite the machine! Just need an obsidian to install... ;)
Also, what color filament is that??
3
3
52
Okay, WOW!
Normally I don't build sets like this, but this is one of the coolest single day projects I've done in a while.
Printed in various
@Polymaker_3D
PLA
Our manual says:
"The axles of locomotives and wagons are plastic, so after long-term use, the vehicles may experience greater resistance and may creak while driving. To extend the time of trouble-free operation, we recommend lightly lubricating the axle with Teflon grease."
0
0
7
4
12
52
Maxing out the build volume on the Doron Velta! I'm glad I added an extra 50mm in the Z height.
Retro Rocket printed in
@Polymaker_3D
Purple PLA
4
6
51
I'm VERY impressed with
@hueforge
so far, this was an image generated from
#midjourney
and filament painted with 4
@Polymaker_3D
colors.
@BambulabGlobal
AMS is beneficial but not required since this is only layer swaps, not true MMU.
WHAT'S NEXT?
6
5
51
WOW this is huge for a 140mm square build volume 🤣
Love it!
8
5
51
First tests of the
#rookprinter
2020 with
@LDOMOTORSJASON
speedy power motors! Speed test at 800mm/s 20k accel, does this make it faster than a K1?
If all goes well this will be at
@rmrrf
! Just need to smooth the
@Polymaker_3D
polysmooth parts and print a few more parts!
8
4
49
Brought my
@BambulabGlobal
A1 Mini to my parents house today, and I had a very specific request to create and print a bolt. A quick design with
@Onshape
and the A1 mini was able to create a few samples in
@West3DPrinting
Ambrosia Dolos.
This is quickly becoming a favorite…
8
3
48
This hotend is crazy! It fails a 50mm^3/s ASA flow test because the heater can't keep up... So it's good to ~45mm^3 with ASA, at least 60% faster as advertised 🤯
🚨 Wait no longer! Fully Assembled ObXidian High Flow
@BambulabGlobal
Hotends are available to buy now 🚀
Equipped with genuine Bambu fans, heater pads and temp sensors, upgrading your P1/X1 just got a whole lot easier 🥳
Buy yours 🛒
16
9
44
9
4
49
It's someone's birthday?!?
Tune into on May 11 at 8pm EST for you chance to win some awesome prizes, hang out, and see what "Special Guests" are going to stop by!
Share this post for bonus luck!
Thanks to the following for offering things to share with…
2
26
50
I can finally see my prints! Just installed the new
@BigTreeTech
light bar kit, very simple to do.
Still trying out the Panda Jet, but so far it seems good. Affiliate:
10
4
49