Riptide Rails
@RiptideRails
Followers
10,750
Following
478
Media
467
Statuses
2,310
Explore trending content on Musk Viewer
الافيس
• 332897 Tweets
Marcellus Williams
• 253665 Tweets
Missouri
• 172427 Tweets
Cubillos
• 133075 Tweets
Vinicius
• 114474 Tweets
Ghana
• 100016 Tweets
#FreetheCitizens
• 97887 Tweets
OQTF
• 74846 Tweets
Alavés
• 60557 Tweets
Nkunku
• 44658 Tweets
Endrick
• 40204 Tweets
Barrow
• 37356 Tweets
Manchin
• 35727 Tweets
#GHLímite3
• 29675 Tweets
Parkinson
• 29611 Tweets
Bernabéu
• 29018 Tweets
Vallejo
• 25563 Tweets
Lunar
• 24723 Tweets
Mélissa
• 20361 Tweets
#StateofPlay
• 18539 Tweets
Ancelotti
• 16673 Tweets
#KohLanta
• 16336 Tweets
EFCC
• 15562 Tweets
Bobrisky
• 15153 Tweets
Valverde
• 13240 Tweets
Mouriño
• 10446 Tweets
Pinned Tweet
Gideon Optics are now available at Riptide Rails!
Free shipping ✅
Lifetime warranty ✅
7
10
52
Testing has begun! All reports on the machined FGC-9 MKII Ejectors have been great so far!
🌊🌊🌊⛱️⛱️⛱️🌴🌴🌴
8
43
516
More successful testing of our machined FGC-9 MKII Ejectors! No failures yet that we are aware of!
🌊🌊🌊⛱️⛱️⛱️🌴🌴🌴
10
35
387
The wait is over
Head over to The Gatalog > Accessories for the files!
🌊🌊🌊🌊🌊🌊🌊🌊🌊
25
72
413
Oh, that's just a pre-production prototype Riptide FGC-9 MKII bolt that will drop right in to your existing FGC-9 MKII. Yep, just pull out the original ejector and you're good to go.
36
44
376
3D-printed holsters for OEM and printed Glock-style frames are just about ready for release. The files will be sailing the high seas over on The Gatalog.
14
28
346
We messed around and put stainless steel feed lips in Menendez mags.
13
20
317
PLA+ in a box in the back of moving truck for a few days in FL be like...
40
6
303
More G40/G20 rails will be in stock today. Limited quantities for now. Waiting on material.
Until then, enjoy a 10mm 33-round mag dump!
4
26
266
More successful testing of our machined FGC-9 MKII Ejectors. At this point, all tests have been 100% successful and we plan to start production this week!
🌊🌊🌊⛱️⛱️⛱️🌴🌴🌴
4
21
183
🎵
You used to warp under the...
You used to,
You used to,
You used to warp under the spring pressure
🎵
3
11
173
FGC-9 Ejectors are now available!
All tests were 100% success!
*Shipping starts Monday*
6
9
168
🔥 FILE DROP 🔥
Huge thanks and congratulations to
@p80ralph
and
@N3utron_Nick
for such an awesome frame with many stippling options!
Looking forward to what's next! 👀
10
16
183
@TheBattlecock
At this point it should be common knowledge that shrapnel from tannerite is campfire smoke's evil cousin.
3
4
174
Peer pressure (definitely not threats) got us cutting steel today.
17
13
183
Here's one from our Instagram page.
Printed in a mix of Siraya Tech's Blu and Tenacious.
🌊🌊🌊
6
18
157
The 3D printable Riptide Holsters are near their final form. Now compatible with DCC Mod 4 clips!
6
17
160
Build a 3D-printed Hi-Power and make your friends jealous.
10
9
138
Don't worry, I didn't forget about our left-handed friends.
15
11
133
Riptide Rails' Plastikov rail kits are shipping this week! They are machined from 304 stainless, ready to install, and include hardware and a hex key! Availability is currently limited, so click the link below for more details and shipping lead time!
3
16
118
Somebody asked for a 3D printed jig to bend the printed mag feed lips. You got it!
I'm getting 0.003" or better from nominal and 0.001" repeatability with them.
Using the 3D printed jig, you can use a vice, arbor press, or even vice grips in a pinch to bend the feed lips.
2
24
138
Machined Mac N Cheese Feed Ramps coming soon. Zero failures to date, but testing will continue.
2
5
129
@SliceWorx3D
These two functional prints serve entirely different purposes from one another but together create a beautiful symbiotic relationship.
2
2
129
Thanks to guidance from
@BrokenBulletz
, my mostly stock Ender 3 printed this
@chairmanwon
frame in
@MatterHackers
NylonX. No modified firmware, no enclosure, no problem.
11
13
123
@Polymaker_3D
@Proto_pasta
Printers are now too fast to worry about resealing the bags. Right now the bottleneck is getting the bag open so we have to do what needs to be done.
4
9
123
PSA regarding Mac-based builds and the front receiver pin
13
13
120
@SliceWorx3D
Needed somewhere to store my 30SST upper, Glock mag, and ar15 lpk so I printed this
1
2
116
Prototype testing intensifies
6
7
111
Our goal is to provide you with a rear rail that will simply drop in and work. These are laser cut, tumbled, deburred, bent, bend-kinks removed, critical dimensions CNC machined (rail width, tab, and holes), and finally tumbled again.
1
10
94
The 3D Print General does not deserve this. Please peruse his links and support him if you can. If you are new to 3D printing I highly recommend his book regarding 3D printing failures. I have been 3D printing for 4 years and still refer to it from time to time.
While I know we should never rely on YouTube, this is a big financial hit to me. Roughly $1,500 - $2,000 per month is now gone. Which is my entire house payment.
I don't like begging, but if you guys buy anything in the near future, please check out my links:
My Book:
64
103
419
2
21
110
Coming soon: 3D-printed holsters! These can be built for dirt cheap and they work very well.
I want to mention that this project started off as a remixed version of the
@phil_phisher
PP43 holster. I went a little crazy with it and thought you all would like it.
I am proud to announce the Riptide Holster beta! A positively badass lineup of quality printable holsters from the one and only
@RiptideRails
. Comfortably carry your Glock 43/43x,26,19, and 17s cheaply and safely. Join the beta on the Deterrence Dispensed Rocket chat today!!!
24
47
328
10
11
106
For those of you who want to have more millimeters than your buddies.
Files + readme right this way:
Will require special rails, which will be linked below!
2
10
101
This could be you for ~$7 in hardware
‘Big Holster’ doesn’t want you to know this one simple trick.
13
12
333
6
5
102
Rice Cutta brings up a good point! If you are running a Riptide Rails Buffer Tube Adapter on your FGC-9, you definitely want the buffer spring spacer!
The spacer and shim can be found here:
Tonight on the RFRD mysteries we solve the case of the bouncy fgc 9 bolt
22
39
622
2
15
92
✅ Machined buttstock adapter
✅ Machined feed ramp
✅ Machined ejector
✅ Machined mag catch
Image courtesy of pc3dp on Instagram
0
4
90
Baby is here and all is well!
👶
Order fulfillment should resume Wednesday, March 9th
We are expecting our 4th child within the next week and a half. Please be patient with us if there are shipping delays. We appreciate your support and patience during this time!
6
2
74
10
5
83
Reach deep into your archives and poast v1 Glock builds
I found some history in my GlockBox. Any of you remember what these are?
23
0
99
17
4
90
How DB Alloy Plates are chamfered and tapped. Y'all like seeing this type of content? Perhaps I'll model and print a phone mount that let's you see the cutting tools in action.
6
5
89
Shopify 86'd our website. We are working to build another store and hope to be live again by Labor Day. Email us at sales
@riptiderails
.com to manually place an order. Taking orders and shipping will continue.
4
13
80
Charging handles for the
@InvaderZip_
ARK are coming as soon as possible. We had unexpected delays in both raw material acquisition and coating turnaround time.
Sorry for the wait!
@awcy_arms
4
6
77
It always makes my day seeing folks getting use out of the Riptide Holster.
2
1
86
We are expecting our 4th child within the next week and a half. Please be patient with us if there are shipping delays. We appreciate your support and patience during this time!
6
2
74
After an overwhelming number of requests, here is the guide that explains how to print NylonX on your [almost] stock Ender 3. If you think I missed something, please let me know and I will update it.
Big thanks to
@BrokenBulletz
for his help and pictures
5
17
83
Different strokes for different folks. Poast your favorite cock below.
24
7
76
@SliceWorx3D
Needed somewhere to store my 30SST upper, Glock mag, and ar15 lpk so I printed this
0
1
76
Here is the cleaned up JStark1809 article. It is still a little challenging to read, but it is much better than before. Source article has been included, as well.
4
9
66
Moving forward, all FGC-9 Buffer Tube Adapters will be compatible with our upcoming FGC-9 MKII Enhanced Bolt. You know...for those of you who wish to continue running a buffer tube.
These counterbores are clearance for the rear of the ejector rod. But why are there two? 🧐
5
9
78
FCG Reinforcement Plates and AR Anti-Walk Pins are now available! Also, DB Alloy Plates are back in stock!
3
13
79
Sneak peek for what's to come Jan. 2022. Can you find it?
6
4
66
First 17 rounds through a Menendez Mag v3!
Last round didn't hold open, as this follower was modified for a different slide lock than the one used in this pistol.
Big thanks to my good friend, Wes, for taking the time and ammo to do all of the initial live fire testing.
2
9
73
Machined FGC-9 MKII parts are back in stock and ready to go!
1
10
75
🌊 - Plenty of DD17.2 and DD19.2 rail kits are available!
🌊- DD26.2 material will be in today!
Photo credit -
@pc3dp
on Instagram
2
3
66
In case you missed the email, DB Alloy Plates are back in stock!
4
14
74
Prototyping the new Railblock for the DDXX.2 rear rails.
Oh, and we have some DD17.2 and DD19.2 kits in stock. Inventory is limited, but more to come tomorrow.
🌊🌊🌊
1
5
56
FGC-9 MKII Ejectors are ready for testing! Production will start as soon as we get feedback.
We need one, maybe two more people to test. Please reach out and let us know if you have a reliable FGC-9 MKII and are able to test for us.
See below for additional information.
6
2
64
@lyind4ce
@688as
@heath3011
@jilevin
@JanetCl71632178
Nothing to see here just a printed Glock dumping 33 rounds of 10mm
2
4
65
