The #EK535 is a bit smaller. It was the hidden basement laboratory folks that spliced the original #MK735 DNA into something smaller...they cut down the height and a bit of the width, but we'll all wait as it still needs to go through beta testing.

Rabbit likes to nibble on the Hosta. Outdoor cameras prove to my dear wife it was not me!

You can quote me on this: "Redundancy only works if you catch the failure(s) before ALL redundancy runs out." #NAS #HDD Thank the gods for (ZFS) RAID-Z2.

Started a tiny chassis project way too long ago. Not sure how far I’ll get before something interrupts it again. This Helios64 (Nano-ITX MB by @kobol_io, but no longer available 😭) might still be the most beautiful, tiny, well thought out ARM powered SOHO NAS to date.

We’re finally scraping out the alpha versions of the #MK735 #NAS/#PC/#computer/#server chassis 🙁…reclaiming screws, fans, USB connectors and whatever. This was one of the last, pre-beta #3DPrints. I always thought of it as the "Orange Creamsicle®" version.

Printing objects with a flexible #TPU filament on the trusty old Original #Prusa MK2S is always a joy…slow and steady, very little or no stringing when using the harder stuff (Shore 98A). Cold bed + 3M blue tape at 215c! We have this stuff dialed in! #3DPrinting

Internet "WayBackMachine". Just because even web history is important, https://t.co/nDlaC6TCPK

I think these are really good photos being they were taken 17 years ago by an R/C helicopter.

Looks like good old basic math and the #PrusaSlicer estimate wins!

💪Today is the day! Welcome the new Original Prusa XL 🥳

Need a bit over 5 meters of PLA for my next print. Spool core circumference = 310mm; # of windings left about 28, so that's 8.68 meters. 👍 Maybe a smart man would have saved time and just used a spool w/more filament, or actually just measured the residual length? #WasteNot #PLA

Aflink for switch: https://t.co/1TTHWqdEpZ During prototyping of the #EK535, even the shorter 60CM cable length version is a bit long. I'll cut it down to about 40CM/16", re-solder and try that.

A simple 16mm blue LED lit power switch hidden behind one of the #EK535 front cover options. I rather like the understated effect the honeycomb grill presents . #NAS #PC #3DPrinted

Prague, we have a problem... Do you have some baling wire or blue tape?

It’s always nice to have a @MicroCenter store just 10 minutes away when another kilo of basic gray PLA+ is needed. Just 36 hours more on this not so small #3DPrint. (Memo to self: At some point you can just over tweak a project)

Good idea to keep one each of those empty #3DFilament spools by vendor. If you have a gram scale that has a “Tare Weight” adjustment, you can sometimes melt that filament down to the very last few grams. In this example, we’re a bit more than 20 grams short for this print.

April 9, 2019 #MK735 beta testing starts. EXACTLY 3 months later it's the featured front page project on @MyMiniFactory! Again, our thanks to the very best of an international group of beta testers! -AngryBug -BrianMoses -MikeHancho -Pete -Stamps 👍

"I can be bought off for 20 grams of your very best kibble". #KittySawThat

“Steel Reinforced PLA”: Here's one method that actually works when you want stronger Z-Axis layers. #Composite #3DPrinting

Many spools of #sewing thread with a matching bobbin for almost all. Keeping that “special shade of red” with the matching bobbin got simpler using a #3DPrinted clip. Calling this first clip #01/01 - Bernina bobbin/Coats & Clark 250 yd. spool - @MicroCenter Inland PLA+ True Red.

With only 164 downloads from https://t.co/joh6J1FIOC, 28 on https://t.co/VdSTXLMyM0 and 17 on https://t.co/RQrFFWnp2y, I may have saved the DIY #3DPrinting #automotive world well over $14,630. The OEM version now sells for a stupid $35+, one needed for each front strut. #Infiniti