Jón Schone
@properprinting
Followers
5K
Following
8K
Media
780
Statuses
3K
I come up with crazy ideas and try to make them real on my YouTube channel. Check https://t.co/cx309QB7dQ You won't guess my next project ;)
Veendam, Nederland
Joined June 2019
My friend @adnarimnavi took our kayak adventure a step further and printed a kayak in less than 24 hours, on a treadmill! You should definitely watch the video!
3
9
43
Let's play a game of guess the part. Length is approximately 80mm.
21
2
52
These are some thick layers! I'm currently printing with a 1.8mm nozzle on the @BambulabGlobal X1C. As far as I'm aware, this hasn't been done before and it can be achieved with a relatively simple and very cheap non-destructive mod. This however is the beginning of my modding
6
6
65
Captured at the perfect moment by Chaosdrucker where Rudolf from @Prusa3D tested the 3D printed kayak that @adnarimnavi and I made on an old treadmill! This was so epic! Check out the video if you haven't already!
3
1
53
Just casually testing a 3D printed kayak in front of an audience for the first time that @adnarimnavi and I printed on a treadmill. Thanks @Prusa3D for making this possible! This has become one of my fondest memories and I'm very happy that I can share this epic adventure with
11
11
107
RT @MicrochipMakes: To print a kayak in a single piece, @adnarimnavi and @properprinting turned a treadmill into an oversized belt 3D print….
0
9
0
RT @3DMakerNoob: @lortunder @properprinting @adnarimnavi @Prusa3D To be fair, it floated, it held a person and it travelled a distance, tha….
0
1
0
We're on our way to Maker Faire Prague. Currently on the A89 in France. Honk if you see a @Prusa3D orange boat flying by! Thanks to Prusa for making this trip happen!
6
4
124
Where's our car? If we don't find it soon we won't make it to Maker Faire Prague in time for the weekend!
5
1
45
I designed a roller for this sawhorse to prevent it from toppling over😆
12
4
94
Day two of "The Print". A bit behind schedule, but still going strong!
13
4
84
