Dragons Hoard Gaming
@DragonsHoardLab
Followers
4K
Following
5K
Media
5K
Statuses
9K
Recommended products: https://t.co/vMAp1ysB9f
Joined October 2017
Sure seems like I’m missing something(s) here… 🤔
7
0
49
This restaurant is a great place to eat and grab a beer here in Kerrville. It’s located right on the river by Louis Hays Park, where a lot of the photos and videos you’ve seen on the news have come from. I’ve been there a few times since they opened and never had a bad
Former Houston Texans star JJ Watt and his wife Kealia Watt have donated $100,000 to support flood relief efforts in Kerr County, where at least 59 people have died and rescue efforts are ongoing.
1
0
8
Thanks for asking, Tim. I’ll be sharing a link below with places you can donate to help the flood victims and support the rescue and relief efforts. If you’re able to help financially, every bit makes a difference. My wife and I loaded up the truck with fold-up tables and our
cleburnetimesreview.com
Editor’s Note: Like everyone, we wanted this story to be true, but it’s a classic tale of misinformation that consumes all of us during a natural disaster. Unfortunately, the story
@DragonsHoardLab Do you know of any places we can donate to, to help the relief efforts over there?
0
1
10
A few people have reached out asking if we’re okay here in Kerrville. We are. I live near the Guadalupe River, it’s just a short 10 minute walk to the dam by my house but thankfully we’re up at a higher elevation so the flooding didn’t affect us directly. I’m also just as close
4
0
39
Craziest I’ve seen in my lifetime. Born and raised here and barely remember the ‘87 flood but that was bad. This is worse. Reports of kids missing from local camps and I’m seeing tons of posts on social media of people looking for loved ones. We’re safe but others not so lucky…
🚨Life-Threatening Flood 📍 Kerrville, Texas 📍Guadalupe River The Guadalupe River in Kerrville, Texas, is experiencing catastrophic flooding this morning, reaching the second-highest level on record and surpassing the devastating 1987 flood. The River surged to a reported 34
2
0
13
The smoke console turned out nice too. The customer kinda gave me free rein with these, so fingers crossed he likes them 😂. I’ve got a Roland BN-20A sign maker in the shop now, and being able to make my own high-quality decals, stickers, etc., is pretty nice...
6
1
52
Really hoping we eventually see some affordable ABS aftermarket shells for these, even if they’re textured and not 100% see-through. I’m guessing it’s not economically viable, or someone would’ve done it by now. Not a fan of the Genesis versions of these, and after putting my
5
4
60
Really liking the brushed metal decals I made, but debating if the 'Nintendo Super Famicom' logo should’ve matched instead of using mirrored vinyl. LMK??? Made my own feet and had to carefully file the shell so the bottom label sits flat and the cart flap fits properly. 👍
10
2
69
Customer wants me to move over these labels from their old Super Famicom Systems to their new shells. I haven't had good luck swapping these metallic labels in the past so I took some scans and recreated the labels. Printed on vinyl, then laminated. They look good to me. 👍
6
2
95
Order # 1572: Panasonic 3DO FZ-10 in for some #FullService. The customer was also having issues with reading disks but after servicing and adjusting the laser she's been doing fine for a few days and ready to head home!
1
3
60
With the laser adjusted and my 3D-printed spacer in place, I’m happy to report this customer’s 3DO is now reading discs flawlessly from start to finish! It was stuttering before (especially on the outer tracks) but not anymore. 👍
0
0
12
After adjusting the laser to spec (420 dudes 🤘) , I had to tackle the grinding issue. The cause? When fully seated, the 2 screws in the gearbox put too much pressure on the worm gear and sled rail, preventing smooth movement. The common “fix” is to back out the screws a bit but
2
0
9
🔧 Some #FullService on this Panasonic 3DO FZ-10. The laser was struggling to read discs and made grinding noises during seek/focus. You can't adjust much on these, but the service manual calls for 450 mVp-p at RFOUT. This one was reading low at ~350 mVp-p (last pic).
1
0
25
Services are back! Finally got the all-clear from Shopify and AMX, so things are up and running again. I’ll be going through the site to clean up wording to avoid future issues🙄. If you have any issues, LMK! 👍 Still playing catch-up on orders and emails bear with me…
@DragonsHoardMod Are your services back up and good to go on your site?
2
3
25
Few more pics of the work done. If you've ever wondered about why there is a model 1 and model 2. The model one was cobbled together with tape, brackets, plates, cables, multiple pcbs and a nice assortment of screws. It NEEDED another rev. lol
0
0
6
Order #1569: Japanese SEGA Saturn #FullService + FRAM + Region Free BIOS + Phantom + Controller Full Service Done! Ready to head home... FINALLY! 🎉
3
0
48